Self Supporting Meat Rail Steel – Used Galvanised Structural Support Job Lot

Used self supporting meat rail support steel – surplus hot dip galvanised structural steel from a completed meat rail installation.

Includes SHS support legs, universal beams and fabricated stools.

Ideal for:

Self supporting meat rail systems
Meat rail support steel
Abattoir rail framework
Chiller rail structures
Industrial overhead rail installations

Storage: Stored indoors in dry warehouse conditions in Bristol, on pallets and off the ground.

Sale type: Sold as one complete job lot (no splitting).

Collection: Preferred. Delivery: Available at cost.

Estimated total weight: Approx. 550kg (guide only).

1 in stock

Fast Delivery
Expert Advice
Exclusive Deals

Features & Benefits

Designed for self supporting meat rail structures

Originally fabricated to support an overhead twin track meat rail system without reliance on existing building steelwork.

Suitable for:

Existing chillers with insufficient roof loading
Retrofitting meat rail systems
Creating independent support structures

Hot dip galvanised steel

All components galvanised to approximately 85 micron for corrosion resistance in washdown and chilled environments.

Industrial grade structural sections

Fabricated from:

100 x 100 SHS columns
UB127 x 76 x 13 beams
UB152 x 89 x 16 beams

Suitable for adaptation by competent fabricators.

Immediate availability

No fabrication lead time. No galvanising delay. Ready for collection or dispatch.

Cost effective used meat rail support steel

Significant saving versus new fabricated structural steelwork.

Technical Specs

SHS Support Legs – 100 x 100

2 x 2483mm high
2 x 3010mm high
1 x 2736mm high
Welded base plates
Welded top plates
Pre-drilled for bolted connections
Hot dip galvanised

Universal Beams

UB127 x 76 x 13

1 x 4000mm
1 x 2500mm

UB152 x 89 x 16

1 x 2500mm
1 x 2000mm

All beams drilled and hot dip galvanised.

Fabricated Stools

148mm stool
622mm stool
702mm stool

Drilled and hot dip galvanised.

Finish: Hot dip galvanised (approx. 85 micron)
Condition: Used – surplus from completed installation
Storage: Indoor dry warehouse storage
Sale type: Complete job lot only
Splitting: Not available
Location: Bristol, UK
Collection: Preferred
Delivery: Available at cost

Buyer responsible for structural design, calculations and suitability.

FAQ's

What Is a Self Supporting Meat Rail System?

A self supporting meat rail system is a structural framework designed to carry the full load of carcasses and rail equipment without relying on existing building steel or roof structure.

This is typically used where:

Roof purlins cannot take load
Building structure is insufficient
Independent rail runs are required
Retrofit installations are being carried out

Structural legs and universal beams form a freestanding frame, with stools or brackets supporting the twin track or tubular rail system.

If you are looking for new design and installation of a self supporting meat rail system, AES Food Equipment can supply complete engineered solutions.